[ProAudio] AES on the west coast, was Re: Ampex/ProAudio List Dinner

Jim Brown jim at audiosystemsgroup.com
Mon Nov 4 10:18:39 EST 2019

On 11/3/2019 7:38 PM, David Josephson wrote:
> For instance as Jim Brown says, every conductor is an antenna.

My favorite quote on this topic is from Henry Ott, who in his lectures 
spoke of the hidden schematic lurking behind the ground symbol. Since my 
retirement, I've been devoting my energies to ham radio, teaching 
fundamentals to folks with a wide variety of technical backgrounds. No 
surprise, the Pin One Problem is a hot topic -- Neil Muncy repeatedly 
told me that it was the primary mechanism behind RFI, and work for a 
paper that David and I co-authored in 2003 proved it. Fast forward to 
today, Pin One in CATV and DSL systems is the cause of EGRESS of RF 
noise that pollutes the radio spectrum.

I do, however, strongly object to the phrase "ground loop," instead 
using Bill's excellent model showing the mechanism as a difference in 
potential chassis-to-chassis between interconnected equipment (or 
chassis to ground) t as the cause of shield current, whether that 
difference is created by IR drops in green wires or antenna action. The 
reason I so strongly object is the that solution, especially in small 
very local systems, is so often proper bonding, which visually creates a 
loop with signal conductor shields. I'm thinking here of a home 
entertainment system or a ham station. I use a drawing of Bill's model 
in my talks and on-sine tutorials.

I stopped teaching at trade shows several years ago because I was 
unwilling to participate in one held in Florida, in protest of the 
acquittal of that vigilante murder and the law that allowed it.

As to our conventions -- my interest has always been in the papers and 
workshops, and hanging out with colleagues. In retirement, I can no 
longer justify the cost of a convention that requires a hotel stay in an 
expensive city.

Henry Ott also did a great breakdown on the inductance of a wire as part 
of a loop.

Jim Brown

More information about the ProAudio mailing list